kPA Vacuum Gauges
-
FYRA Bleed plus Flow Controller | Mass Flow Controller alternative
$3,357.59 Add to cartFYRA Bleed Vacuum Controller is a mass flow controller alternative for venting/bleeding in gases to a chamber. Works in 2 ways: maintaining a particular vacuum or bleeding in a specific flow rate. Speeds up distillations and vacum drying by increasing molecular flow, with a range fom 35 SCCM to 3620 SCCM.
-
FYRA Vacuum Controller Distillation Bundle | 2 Sensors for System with Roughing pump | 10 millitorr to 6 Torr
$3,127.00 – $3,325.00 Select options This product has multiple variants. The options may be chosen on the product pageThis FYRA Vacuum Controller Distillation Bundle includes a high throughput bellows valve for throttle control and 2 thermocouple sensors to monitor the vacuum pressure of the roughing pump, as well as the system itself. Can control from 10 mT to 6 Torr.
-
DINAMO | Proportional Control and Venting in One | Rough Vacuum Controller 2 to 760 Torr
$5,809.94 – $6,019.82 Select options This product has multiple variants. The options may be chosen on the product pageGet More with Dinamo! Control rough vacuum 2 Torr to 770 Torr with this Dual-Valve design that delivers proportional control and venting in one. (lead time 2 weeks)
-
Bullseye Piezo | Vacuum to PSI Bluetooth Gauge | UL, CSA, CE | 50 Torr to 85 PSIG
$1,260.00 Add to cartThe Bluetooth Bullseye Precision Gauge Piezo-measures both vacuum and PSI. It provides highly accurate and reliable vacuum reading from 20 Torr to 85 PSIG and 11 additional measurement units.
-
StrataVac Vacuum Controller | Industrial Millitorr Throttle Controller | .01 Torr to 6 Torr Control Range
$2,084.41 Add to cartStrataVac throttle vacuum controller comes with an Agilent 536 KF25 sensor, and throttle plunger valve with a 0.05″ orifice that is fast acting delivering tighter control on your process.
Currently on Backorder, will be available February 2025.
-
Portable DigiVac DASH Catalyst Kit with Capacitance Manometer Gauges for Calibration
$9,840.00 Add to cartDASH Catalyst Kit is a Simple way to validate vacuum measurement tools used in semiconductor + manufacturing. Includes everything needed to verify accuracy of tools during tool matching, Portable and user friendly, Compact for high volume + complex manufacturing floors.
Currently 6-8 week lead time
-
DigiVac EXACT Carts: Mobile Turbo SNAP System | Automated High Vacuum Pump-down System with Medium and Low Vacuum Control
$55,350.00 – $87,125.00 Select options This product has multiple variants. The options may be chosen on the product pagethe DigiVac EXACT: Mobile Automated Turbo system with the SNAP is a high vacuum pump down system includes not only the high vacuum pump, backing and roughing pumps, but also integrates those components into a mobile cart that can control or ramp at any pressure from 50 millitorr to 760 torr, and evacuate to high vacuum at the touch of a button.
Enables an operator to easily connect a vacuum chamber, and immediately pump down to high vacuum, vent to Atmosphere, or control at any point between 50 millitorr to 760 torr
-
FYRA Freeze | Freeze Dryer Controller for Lyophilization
$5,104.13 Add to cartDigiVac’s FYRA Freeze Controller optimizes the lyophilization process in Freeze drying by being used to upgrade or retrofit a small to medium freeze dryers that measures and controls both vacuum and shelf temperature with both heat and refrigeration.
-
DigiVac EXACT Carts: Leak Detection Replicating Human Suction
$28,187.50 Add to cartA turnkey leak test system to simulate the human sipping experience created to assist in expediting the testing required in product development by simulating human suction levels. Perfect for testing vacuum suction for Product development teams who might be making straws, bottles with straws, vaporizers or other devices that would require a human to breath in through a device.
